The SRDB25AES digital output adapter mounts onto any Digital Hybrid Wireless® SR Series 2-channel slot receiver and converts the analog audio outputs from the receiver to AES digital at 48 kHz. This adapter is especially useful when pairing an an SRC in a slot dock with a new receiver like a DSR4, thus allowing all channels from both receivers to enter through the slot in digital format. Note that Sound Devices 8-Series firmware must be v9.50 or higher for this adapter to work properly in an SL-2. The Sound Devices SL-6 will not recognize this adapter. SRB and older receivers are not compatible with this adapter when used in an SL-2.

This adapter is taller than most other SR-Series bottom plates – it adds a little over ½ inch to the receiver case length. When installed in a dock or camera, the resulting height is identical to a DSR4 mounted with a DSR4DB25 bottom plate. In other words, when a DSR4 is slotted next to an SRC with one of these adapters on it, both receivers will be the same height while in the dock.

SRDB25AES Data Sheet

Lectrosonics SRC Receiver