The RS-701 is a single-channel analog beltpack that can carry power and audio through the XLR-3 line connector. Each beltpack combines high headroom, low-noise audio and shaped frequency contour (the “Clear-Com Sound”) to deliver clear audio.

Note: Access the Encore Power Supply Calculator to estimate power requirements for analog partyline systems.

DETAILS

• Visual LED indicators on top of keypad

• Tactile buttons for Call and Talk

• Recessed rotary controls for Volume with end stops

• Concealed, programmable DIP switches for Latch Talk, Talk with Call, LEDs Off, Mic Gain, Mic Type and HP Level Off

• Fully compatible with current and previous models of Clear-Com analog partyline systems

• Low operating current for more beltpack daisy-chaining

• Rugged and strong construction

• “Clear-Com Sound” for intelligible audio

TECHNICAL SPECIFICATIONS

dBu is an absolute measurement. 0dBu is referenced to 0.775 volts RMS

Microphone Pre-Amplifier

Mic to Line (without limiter acting)

Frequency Response: 280 – 15kHz ± 3dB

Microphone output to line – Audio Level (-50dBm Electret input):-9dBm

Microphone output to line – Distortion: <0.1%

Microphone output to line – Signal to Noise: >65dB

Headphone Pre-Amplifier

Frequency Response – Line to Headphone: 150 – 20kHz ± 3dB

Headphone input from line – Audio Level (-9dBm Electret input):3.5dBm

Headphone input from line – Distortion: <0.5%

Headphone input from line – Signal to Noise: >50dB

Earphone to Mic – Crosstalk: >80dB

Sidetone – Adjustment Range (-80db mic input): >45dB

Keypad Indicators

Power: Green LED

Talk: Green LED

Call: Orange LED

Connectors

Intercom Line: (2) 3-pin XLR–M–F

Pin 1: Common

Pin 2: PL Power (+28V DC)

Pin 3: Line (Audio)