The BS410 is the base station for the DX410 wireless system, used with wireless BP410 beltpacks. A single DX410 base station supports up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. Two-wire auto-nulling enables fast and accurate integration with Clear-Com and RTS wired partyline systems.

DETAILS

• 2-channels of communications

• 2.4GHz license-free operation

• Supports up to 15 beltpacks in a single system

• 7kHz wideband audio

• 2-wire and 4-wire bridging on the same system

• 2-wire auto-nulling

• Lost packet concealment

• Simple to set up and configure

TECHNICAL
SPECIFICATIONS

Audio

Channels: 2 audio channels

Capacity: Up to 15 BP410 and/or WH410 per base station

Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex. Radio Frequency Range: 2400 – 2483.5 MHz

Audio Frequency: 200 Hz – 7kHz

4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire

2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200Ω , level adjustable, null adjustable to 50dB attenuation, typical

Aux Input: XLR-3F with ¼” (6.35mm) combo jack, 600Ω  balanced, level adjustable

Aux Output: XLR-3M, 600Ω  balanced, level adjustable

Headset Connector: 4-pin mini-DIN, Electret microphone

Headset Output: 200mW into 32Ω 

Antenna Type: External ½-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity

System Distortion: <2%

Communication Security: dual-slot diversity

Transmitter

Type: Frequency Hopping, Spread Spectrum (FHSS)

Transmit Power: 100mW burst

Modulation Type: Gaussian filtered FSK, TDMA

Frequency Stability: 13 ppm

Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature